Class uvm_report_object

• uvm_pkg :: uvm_void

  • uvm_pkg :: uvm_object

    • uvm_pkg :: uvm_report_object

Reset

Inheritance Diagram of uvm_report_object

The uvm_report_object provides an interface to the UVM reporting facility. Through this interface, components issue the various messages that occur during simulation. Users can configure what actions are taken and what file(s) are output for individual messages from a particular component or for all messages from all components in the environment. Defaults are applied where there is no explicit configuration.

Most methods in uvm_report_object are delegated to an internal instance of a uvm_report_handler, which stores the reporting configuration and determines whether an issued message should be displayed based on that configuration. Then, to display a message, the report handler delegates the actual formatting and production of messages to a central uvm_report_server.

A report consists of an id string, severity, verbosity level, and the textual message itself. They may optionally include the filename and line number from which the message came. If the verbosity level of a report is greater than the configured maximum verbosity level of its report object, it is ignored. If a report passes the verbosity filter in effect, the report's action is determined. If the action includes output to a file, the configured file descriptor(s) are determined.

Actions

can be set for (in increasing priority) severity, id, and (severity,id) pair. They include output to the screen <UVM_DISPLAY>, whether the message counters should be incremented <UVM_COUNT>, and whether a $finish should occur <UVM_EXIT>.

Default Actions

The following provides the default actions assigned to each severity. These can be overridden by any of the set__action* methods.

UVM_INFO -       UVM_DISPLAY
UVM_WARNING -    UVM_DISPLAY
UVM_ERROR -      UVM_DISPLAY | UVM_COUNT
UVM_FATAL -      UVM_DISPLAY | UVM_EXIT

File descriptors

These can be set by (in increasing priority) default, severity level, an id, or (severity,id) pair. File descriptors are standard SystemVerilog file descriptors; they may refer to more than one file. It is the user's responsibility to open and close them.

Default file handle

The default file handle is 0, which means that reports are not sent to a file even if a UVM_LOG attribute is set in the action associated with the report. This can be overridden by any of the set__file* methods.

Constructors

function new ( string name )

Creates a new report object with the given name. This method also creates a new uvm_report_handler object to which most tasks are delegated.

Functions

function uvm_report_object uvm_get_report_object ( )

Returns the nearest uvm_report_object when called. From inside a uvm_component, the method simply returns this .

See also the global version of uvm_get_report_object.

function int uvm_report_enabled ( int verbosity, uvm_severity severity, string id )

Returns 1 if the configured verbosity for this severity/id is greater than or equal to verbosity else returns 0.

See also get_report_verbosity_level and the global version of uvm_report_enabled.

virtual function void uvm_report ( uvm_severity severity, string id, string message, int verbosity, string filename, int line, string context_name, bit report_enabled_checked )

virtual function void uvm_report_info ( string id, string message, int verbosity, string filename, int line, string context_name, bit report_enabled_checked )

virtual function void uvm_report_warning ( string id, string message, int verbosity, string filename, int line, string context_name, bit report_enabled_checked )

virtual function void uvm_report_error ( string id, string message, int verbosity, string filename, int line, string context_name, bit report_enabled_checked )

virtual function void uvm_report_fatal ( string id, string message, int verbosity, string filename, int line, string context_name, bit report_enabled_checked )

These are the primary reporting methods in the UVM. Using these instead of $display and other ad hoc approaches ensures consistent output and central control over where output is directed and any actions that result. All reporting methods have the same arguments, although each has a different default verbosity:

id

a unique id for the report or report group that can be used for identification and therefore targeted filtering. You can configure an individual report's actions and output file(s) using this id string.

message

the message body, preformatted if necessary to a single string.

verbosity

the verbosity of the message, indicating its relative importance. If this number is less than or equal to the effective verbosity level, see set_report_verbosity_level, then the report is issued, subject to the configured action and file descriptor settings. Verbosity is ignored for warnings, errors, and fatals. However, if a warning, error or fatal is demoted to an info message using the uvm_report_catcher, then the verbosity is taken into account.

filename/line

(Optional) The location from which the report was issued. Use the predefined macros, FILE and _LINE_. If specified, it is displayed in the output.

context_name

(Optional) The string context from where the message is originating. This can be the %m of a module, a specific method, etc.

report_enabled_checked

(Optional) This bit indicates whether the currently provided message has been checked as to whether the message should be processed. If it hasn't been checked, it will be checked inside the uvm_report function.

virtual function void uvm_process_report_message ( uvm_report_message report_message )

This method takes a preformed uvm_report_message, populates it with the report object and passes it to the report handler for processing. It is expected to be checked for verbosity and populated.

function int get_report_verbosity_level ( uvm_severity severity, string id )

Gets the verbosity level in effect for this object. Reports issued with verbosity greater than this will be filtered out. The severity and tag arguments check if the verbosity level has been modified for specific severity/tag combinations.

function int get_report_max_verbosity_level ( )

Gets the maximum verbosity level in effect for this report object. Any report from this component whose verbosity exceeds this maximum will be ignored.

function void set_report_verbosity_level ( int verbosity_level )

This method sets the maximum verbosity level for reports for this component. Any report from this component whose verbosity exceeds this maximum will be ignored.

function void set_report_id_verbosity ( string id, int verbosity )

function void set_report_severity_id_verbosity ( uvm_severity severity, string id, int verbosity )

These methods associate the specified verbosity threshold with reports of the given severity , id , or severity-id pair. This threshold is compared with the verbosity originally assigned to the report to decide whether it gets processed. A verbosity threshold associated with a particular severity-id
pair takes precedence over a verbosity threshold associated with id , which takes precedence over a verbosity threshold associated with a severity .

The verbosity argument can be any integer, but is most commonly a predefined uvm_verbosity value, <UVM_NONE>, <UVM_LOW>, <UVM_MEDIUM>, <UVM_HIGH>, <UVM_FULL>.

function int get_report_action ( uvm_severity severity, string id )

Gets the action associated with reports having the given severity and id .

function void set_report_severity_action ( uvm_severity severity, uvm_action action )

function void set_report_id_action ( string id, uvm_action action )

function void set_report_severity_id_action ( uvm_severity severity, string id, uvm_action action )

These methods associate the specified action or actions with reports of the given severity , id , or severity-id pair. An action associated with a particular severity-id pair takes precedence over an action associated with id , which takes precedence over an action associated with a severity .

The action argument can take the value <UVM_NO_ACTION>, or it can be a bitwise OR of any combination of <UVM_DISPLAY>, <UVM_LOG>, <UVM_COUNT>, <UVM_STOP>, <UVM_EXIT>, and <UVM_CALL_HOOK>.

function int get_report_file_handle ( uvm_severity severity, string id )

Gets the file descriptor associated with reports having the given severity and id .

function void set_report_default_file ( UVM_FILE file )

function void set_report_id_file ( string id, UVM_FILE file )

function void set_report_severity_file ( uvm_severity severity, UVM_FILE file )

function void set_report_severity_id_file ( uvm_severity severity, string id, UVM_FILE file )

These methods configure the report handler to direct some or all of its output to the given file descriptor. The file argument must be a multi-channel descriptor (mcd) or file id compatible with $fdisplay.

A FILE descriptor can be associated with reports of the given severity , id , or severity-id pair. A FILE associated with a particular severity-id pair takes precedence over a FILE associated with id , which take precedence over an a FILE associated with a severity , which takes precedence over the default FILE descriptor.

When a report is issued and its associated action has the UVM_LOG bit set, the report will be sent to its associated FILE descriptor. The user is responsible for opening and closing these files.

function void set_report_severity_override ( uvm_severity cur_severity, uvm_severity new_severity )

function void set_report_severity_id_override ( uvm_severity cur_severity, string id, uvm_severity new_severity )

These methods provide the ability to upgrade or downgrade a message in terms of severity given severity and id . An upgrade or downgrade for a specific id takes precedence over an upgrade or downgrade associated with a severity .

function void set_report_handler ( uvm_report_handler handler )

Sets the report handler, overwriting the default instance. This allows more than one component to share the same report handler.

function uvm_report_handler get_report_handler ( )

Returns the underlying report handler to which most reporting tasks are delegated.

function void reset_report_handler ( )

Resets the underlying report handler to its default settings. This clears any settings made with the set_report_* methods (see below).

virtual function bit report_info_hook ( string id, string message, int verbosity, string filename, int line )

Function- report_info_hook

virtual function bit report_error_hook ( string id, string message, int verbosity, string filename, int line )

Function- report_error_hook

virtual function bit report_warning_hook ( string id, string message, int verbosity, string filename, int line )

Function- report_warning_hook

virtual function bit report_fatal_hook ( string id, string message, int verbosity, string filename, int line )

Function- report_fatal_hook

virtual function bit report_hook ( string id, string message, int verbosity, string filename, int line )

Function- report_hook

These hook methods can be defined in derived classes to perform additional actions when reports are issued. They are called only if the <UVM_CALL_HOOK> bit is specified in the action associated with the report. The default implementations return 1, which allows the report to be processed. If an override returns 0, then the report is not processed.

First, the report_hook method is called, followed by the severity-specific hook (report_info_hook, etc.). If either hook method returns 0 then the report is not processed further.

virtual function void report_header ( UVM_FILE file )

Function- report_header

Prints version and copyright information. This information is sent to the command line if file is 0, or to the file descriptor file if it is not 0. The uvm_root::run_test task calls this method just before it component phasing begins.

Use uvm_root::report_header()

virtual function void report_summarize ( UVM_FILE file )

Function- report_summarize

Outputs statistical information on the reports issued by the central report server. This information will be sent to the command line if file is 0, or to the file descriptor file if it is not 0.

The run_test method in uvm_top calls this method.

Use

uvm_report_server rs =uvm_report_server::get_server(); rs.report_summarize();

virtual function void die ( )

Function- die

This method is called by the report server if a report reaches the maximum quit count or has a UVM_EXIT action associated with it, e.g., as with fatal errors.

Calls the uvm_component::pre_abort() method on the entire uvm_component hierarchy in a bottom-up fashion. It then call calls report_summarize and terminates the simulation with $finish .

Use

uvm_report_server rs =uvm_report_server::get_server(); rs.die()

function void set_report_max_quit_count ( int max_count )

Function- set_report_max_quit_count

Sets the maximum quit count in the report handler to max_count . When the number of UVM_COUNT actions reaches max_count , the die method is called.

The default value of 0 indicates that there is no upper limit to the number of UVM_COUNT reports.

Use

uvm_report_server rs =uvm_report_server::get_server(); rs.set_max_quit_count()

function uvm_report_server get_report_server ( )

Function- get_report_server

Returns the uvm_report_server instance associated with this report object.

Use uvm_report_server::get_server()

function void dump_report_state ( )

Function- dump_report_state

This method dumps the internal state of the report handler. This includes information about the maximum quit count, the maximum verbosity, and the action and files associated with severities, ids, and (severity, id) pairs.

Use

uvm_report_handler rh =get_report_handler(); rh.print().

×